Clear & Transparent

clear & transparent, leather & premium and magsafe compatible

How COD works

What the rider will ask for, what you can and cannot do at the door, and what protects you after it closes.

How cash on delivery works at Ilaaf Online, and what to check before you accept a parcel

Delivery times by city

The real zone table, plus the days-from-order total that the zone table alone does not tell you.

How long delivery takes to your city

Cases that actually fit, for phones people actually carry in Pakistan. Every cover is checked against a real handset before it ships.

Mobile Covers

Covers for every iPhone from the 13 to the 18 — cut to the exact camera island, button and port positions of each model.

iPhone Cases

Slim clear covers that show the phone rather than hide it. Anti-yellowing coating, raised camera and screen lips.

Liquid silicone over a hard shell, with a microfibre lining. Warm in the hand and grippy enough to survive a rickshaw ride.

Silicone & Soft Touch

Full-grain and saffiano leather covers that patina with use. For people who keep a phone for three years, not three months.

Leather & Premium

Dual-layer armour with reinforced corners and tested drop protection. Built for site work, delivery riding and school bags.

Rugged & Protective

Prints made in-house and pressed into the shell so they do not peel at the corner after a month in a pocket.

Printed & Designer

Full magnet arrays that hold a wallet, a car mount and a charging puck — not the two weak magnets a cheap case ships with.

MagSafe Compatible

A sealed two-piece shell with a silicone gasket around the whole perimeter and screw-down port covers. Rated IP68 — submersible to 2 m for 30 minutes, which in practice means it survives a monsoon commute and a dusty February.

The screen protector is built in and does not need a separate film.

Cut for the iPhone 13: the camera island, side buttons, mute switch and charging port sit where they do on this model specifically — not a shared shell with approximate holes.

IP68 waterproof sealed iPhone case with a built-in screen protector. Made for the iPhone 13.

Barsat Sealed Case for iPhone 13 — Ilaaf Defence

Barsat Sealed Case for iPhone 13

Gasket-sealed against monsoon rain and dust. IP68 rated.

Barsat Sealed Case in Ink for iPhone 13 — side profile

A sealed two-piece shell with a silicone gasket around the whole perimeter and screw-down port covers. Rated IP68 — submersible to 2 m for 30 minutes, which in practice means it survives a monsoon commute and a dusty February.

The screen protector is built in and does not need a separate film.

Cut for the iPhone 13 Pro: the camera island, side buttons, mute switch and charging port sit where they do on this model specifically — not a shared shell with approximate holes.

Barsat Sealed Case in Ink for iPhone 13 Pro

IP68 waterproof sealed iPhone case with a built-in screen protector. Made for the iPhone 13 Pro.

Barsat Sealed Case for iPhone 13 Pro — Ilaaf Defence

Barsat Sealed Case for iPhone 13 Pro

Barsat Sealed Case in Ink for iPhone 13 Pro — side profile

A sealed two-piece shell with a silicone gasket around the whole perimeter and screw-down port covers. Rated IP68 — submersible to 2 m for 30 minutes, which in practice means it survives a monsoon commute and a dusty February.

The screen protector is built in and does not need a separate film.

Cut for the iPhone 13 Pro Max: the camera island, side buttons, mute switch and charging port sit where they do on this model specifically — not a shared shell with approximate holes.

Barsat Sealed Case in Ink for iPhone 13 Pro Max

IP68 waterproof sealed iPhone case with a built-in screen protector. Made for the iPhone 13 Pro Max.

Barsat Sealed Case for iPhone 13 Pro Max — Ilaaf Defence

Barsat Sealed Case for iPhone 13 Pro Max

Barsat Sealed Case in Ink for iPhone 13 Pro Max — side profile

A sealed two-piece shell with a silicone gasket around the whole perimeter and screw-down port covers. Rated IP68 — submersible to 2 m for 30 minutes, which in practice means it survives a monsoon commute and a dusty February.

The screen protector is built in and does not need a separate film.

Cut for the iPhone 14: the camera island, side buttons, mute switch and charging port sit where they do on this model specifically — not a shared shell with approximate holes.

IP68 waterproof sealed iPhone case with a built-in screen protector. Made for the iPhone 14.

Barsat Sealed Case for iPhone 14 — Ilaaf Defence

Barsat Sealed Case for iPhone 14

Barsat Sealed Case in Ink for iPhone 14 — side profile

A sealed two-piece shell with a silicone gasket around the whole perimeter and screw-down port covers. Rated IP68 — submersible to 2 m for 30 minutes, which in practice means it survives a monsoon commute and a dusty February.

The screen protector is built in and does not need a separate film.

Cut for the iPhone 14 Pro: the camera island, side buttons, mute switch and charging port sit where they do on this model specifically — not a shared shell with approximate holes.

Barsat Sealed Case in Ink for iPhone 14 Pro

IP68 waterproof sealed iPhone case with a built-in screen protector. Made for the iPhone 14 Pro.

Barsat Sealed Case for iPhone 14 Pro — Ilaaf Defence

Barsat Sealed Case for iPhone 14 Pro

Barsat Sealed Case in Ink for iPhone 14 Pro — side profile

A sealed two-piece shell with a silicone gasket around the whole perimeter and screw-down port covers. Rated IP68 — submersible to 2 m for 30 minutes, which in practice means it survives a monsoon commute and a dusty February.

The screen protector is built in and does not need a separate film.

Cut for the iPhone 14 Pro Max: the camera island, side buttons, mute switch and charging port sit where they do on this model specifically — not a shared shell with approximate holes.

Barsat Sealed Case in Ink for iPhone 14 Pro Max

IP68 waterproof sealed iPhone case with a built-in screen protector. Made for the iPhone 14 Pro Max.

Barsat Sealed Case for iPhone 14 Pro Max — Ilaaf Defence

Barsat Sealed Case for iPhone 14 Pro Max

Barsat Sealed Case in Ink for iPhone 14 Pro Max — side profile

A sealed two-piece shell with a silicone gasket around the whole perimeter and screw-down port covers. Rated IP68 — submersible to 2 m for 30 minutes, which in practice means it survives a monsoon commute and a dusty February.

The screen protector is built in and does not need a separate film.

Cut for the iPhone 15: the camera island, side buttons, mute switch and charging port sit where they do on this model specifically — not a shared shell with approximate holes.

IP68 waterproof sealed iPhone case with a built-in screen protector. Made for the iPhone 15.

Barsat Sealed Case for iPhone 15 — Ilaaf Defence

Barsat Sealed Case for iPhone 15

Barsat Sealed Case in Ink for iPhone 15 — side profile

A sealed two-piece shell with a silicone gasket around the whole perimeter and screw-down port covers. Rated IP68 — submersible to 2 m for 30 minutes, which in practice means it survives a monsoon commute and a dusty February.

The screen protector is built in and does not need a separate film.

Cut for the iPhone 15 Pro: the camera island, side buttons, mute switch and charging port sit where they do on this model specifically — not a shared shell with approximate holes.

Barsat Sealed Case in Ink for iPhone 15 Pro

IP68 waterproof sealed iPhone case with a built-in screen protector. Made for the iPhone 15 Pro.

Barsat Sealed Case for iPhone 15 Pro — Ilaaf Defence

Barsat Sealed Case for iPhone 15 Pro

Barsat Sealed Case in Ink for iPhone 15 Pro — side profile

A sealed two-piece shell with a silicone gasket around the whole perimeter and screw-down port covers. Rated IP68 — submersible to 2 m for 30 minutes, which in practice means it survives a monsoon commute and a dusty February.

The screen protector is built in and does not need a separate film.

Cut for the iPhone 15 Pro Max: the camera island, side buttons, mute switch and charging port sit where they do on this model specifically — not a shared shell with approximate holes.

Barsat Sealed Case in Ink for iPhone 15 Pro Max

IP68 waterproof sealed iPhone case with a built-in screen protector. Made for the iPhone 15 Pro Max.

Barsat Sealed Case for iPhone 15 Pro Max — Ilaaf Defence

Barsat Sealed Case for iPhone 15 Pro Max

Barsat Sealed Case in Ink for iPhone 15 Pro Max — side profile

A sealed two-piece shell with a silicone gasket around the whole perimeter and screw-down port covers. Rated IP68 — submersible to 2 m for 30 minutes, which in practice means it survives a monsoon commute and a dusty February.

The screen protector is built in and does not need a separate film.

Cut for the iPhone 16: the camera island, side buttons, mute switch and charging port sit where they do on this model specifically — not a shared shell with approximate holes.

IP68 waterproof sealed iPhone case with a built-in screen protector. Made for the iPhone 16.

Barsat Sealed Case for iPhone 16 — Ilaaf Defence

Barsat Sealed Case for iPhone 16

Barsat Sealed Case in Ink for iPhone 16 — side profile

A sealed two-piece shell with a silicone gasket around the whole perimeter and screw-down port covers. Rated IP68 — submersible to 2 m for 30 minutes, which in practice means it survives a monsoon commute and a dusty February.

The screen protector is built in and does not need a separate film.

Cut for the iPhone 16 Pro: the camera island, side buttons, mute switch and charging port sit where they do on this model specifically — not a shared shell with approximate holes.

Barsat Sealed Case in Ink for iPhone 16 Pro

IP68 waterproof sealed iPhone case with a built-in screen protector. Made for the iPhone 16 Pro.

Barsat Sealed Case for iPhone 16 Pro — Ilaaf Defence

Barsat Sealed Case for iPhone 16 Pro

Barsat Sealed Case in Ink for iPhone 16 Pro — side profile

A sealed two-piece shell with a silicone gasket around the whole perimeter and screw-down port covers. Rated IP68 — submersible to 2 m for 30 minutes, which in practice means it survives a monsoon commute and a dusty February.

The screen protector is built in and does not need a separate film.

Cut for the iPhone 16 Pro Max: the camera island, side buttons, mute switch and charging port sit where they do on this model specifically — not a shared shell with approximate holes.

Barsat Sealed Case in Ink for iPhone 16 Pro Max

IP68 waterproof sealed iPhone case with a built-in screen protector. Made for the iPhone 16 Pro Max.

Barsat Sealed Case for iPhone 16 Pro Max — Ilaaf Defence

Barsat Sealed Case for iPhone 16 Pro Max

Barsat Sealed Case in Ink for iPhone 16 Pro Max — side profile